Silver Saints is London's premier handyman service, one of the many jobs we specialise in is the clearing of blocked toilets.
Toilet unblocking in London has given me plenty of stories to blog about. This morning I went to a property in East London. On entering the property the customer told me that it was a clean job and that he knew why the toilet was blocked. On enquiring further he confessed that he had flushed a cucumber down the toilet and it had obviously become stuck.
On hearing this I thought I was in for a complicated process of trying to retrieve the cucumber from somewhere in the waste pipe. But luckily I was able to blast it free after about fifteen minutes of trying.
One of our handymen, Roger, had less luck when trying to clear a blocked toilet in Croydon recently. The customer had tried to flush an old rag down the toilet and it had become stuck in the soil stack. Roger had to use a 10m auger to pull the rag down the pipe to an access point where he could remove the rag by hand. Unfortunately, the rag was followed by everything that was backing up behind the blockage.
Thursday, 16 October 2008
Tuesday, 30 September 2008
Electric Shower Repairs
The steady stream of shower repairs has continued this week. Mostly it seems to be electric showers that are developing faults.
We often find that the fault in an electric shower is a solenoid that has failed. But recently we've discovered that a failed solenoid is a symptom of another fault. In two cases last week we replaced faulty solenoid valves on electric showers to discover that the original solenoid had actually failed because a leak had developed within the shower.
Given the cost of the replacement parts for electric showers compared the actual cost of the shower, it is often more economical to replace the shower with a similar unit. Often these days it's the labour cost that is the deciding factor between repair of replacement. A like for like shower replacement can normally be done in 60 minutes. Whereas fault finding, ordering parts and fitting them does often take allot longer than this.
If you have a shower that needs repairs, don't hesitate to contact us on 0207 0999 199 or send an email to fixit@silversaints.co.uk
We often find that the fault in an electric shower is a solenoid that has failed. But recently we've discovered that a failed solenoid is a symptom of another fault. In two cases last week we replaced faulty solenoid valves on electric showers to discover that the original solenoid had actually failed because a leak had developed within the shower.
Given the cost of the replacement parts for electric showers compared the actual cost of the shower, it is often more economical to replace the shower with a similar unit. Often these days it's the labour cost that is the deciding factor between repair of replacement. A like for like shower replacement can normally be done in 60 minutes. Whereas fault finding, ordering parts and fitting them does often take allot longer than this.
If you have a shower that needs repairs, don't hesitate to contact us on 0207 0999 199 or send an email to fixit@silversaints.co.uk
London Handyman Service
Silver Saints is London's premier handyman service.
0207 0999 199
fixit@silversaints.co.uk
We are best described as a team of multi-skilled, experienced and reliable Handymen who travel around London on motorcycles undertaking plumbing, electrics, fixing, fitting, assembling and hanging jobs. In fact we employ the most experience handymen in London.
Friendly, Flexible, Efficient and Trustworthy - these are the words that describe our Silver Saints Handyman Service and these are the words you'll be using when telling your friends about how we showed up on time, did all the jobs on your ‘to do’ list, cleaned up after ourselves and charged you fairly and accurately.
(Read what our customers think about Silver Saints)
Silver Saints has the most experienced Handymen in London. In addition most come from professional backgrounds that include: Engineers, Accountants, Management Consultants, Quantity Surveyors and even a Royal Air Force Pilot. This means that you are getting a person who has great communication skills, copes well under pressure and understands the value of customer relations.We know what it takes to offer great customer service and we strive to leave a satisfied customer 100% of the time. Our dedicated Operations Team, based in Central London, are on call to discuss any jobs you need doing, as well as manage your booking until completion.
That is enough about us! Give us a call or book online and let us concentrate on giving you the Silver Service you deserve. 0207 0999 199
0207 0999 199
fixit@silversaints.co.uk
We are best described as a team of multi-skilled, experienced and reliable Handymen who travel around London on motorcycles undertaking plumbing, electrics, fixing, fitting, assembling and hanging jobs. In fact we employ the most experience handymen in London.
Friendly, Flexible, Efficient and Trustworthy - these are the words that describe our Silver Saints Handyman Service and these are the words you'll be using when telling your friends about how we showed up on time, did all the jobs on your ‘to do’ list, cleaned up after ourselves and charged you fairly and accurately.
(Read what our customers think about Silver Saints)
Silver Saints has the most experienced Handymen in London. In addition most come from professional backgrounds that include: Engineers, Accountants, Management Consultants, Quantity Surveyors and even a Royal Air Force Pilot. This means that you are getting a person who has great communication skills, copes well under pressure and understands the value of customer relations.We know what it takes to offer great customer service and we strive to leave a satisfied customer 100% of the time. Our dedicated Operations Team, based in Central London, are on call to discuss any jobs you need doing, as well as manage your booking until completion.
That is enough about us! Give us a call or book online and let us concentrate on giving you the Silver Service you deserve. 0207 0999 199
Labels:
Handyman,
handyman in london,
handyman London,
London Handyman
Tile and Grout cleaning
We've recently added a new service to the list of specialist jobs our London handymen undertake, grout and tile cleaning.
In short a Handyman arrives with a special machine that uses steam to blast out any ingrained dirt or soap that has settled into the tile grout over the years. The result is a new lease of life for both wall and floor tiles in either bathrooms or kitchens.
For this tile and grout cleaning service we will normally charge:
£40+VAT for the first 1m2 of tiles
£15+VAT for every 1m2 after that.
If you would like to know more or would like to book a Handyman to clean your bathroom or kitchen tiles don’t hesitate to contact me directly via email, fixit@silversaints.co.uk or on 0207 0999 199.
In short a Handyman arrives with a special machine that uses steam to blast out any ingrained dirt or soap that has settled into the tile grout over the years. The result is a new lease of life for both wall and floor tiles in either bathrooms or kitchens.
For this tile and grout cleaning service we will normally charge:
£40+VAT for the first 1m2 of tiles
£15+VAT for every 1m2 after that.
If you would like to know more or would like to book a Handyman to clean your bathroom or kitchen tiles don’t hesitate to contact me directly via email, fixit@silversaints.co.uk or on 0207 0999 199.
Wednesday, 24 September 2008
DIY Plumbing ending in tears.
We have had a series of jobs recently were we have been called in to redo plumbing that was done by amateur DIYers. Normally when this happens its because the dodgy plumbing has failed and resulted in a persistent or catastrophic leak.
One of the jobs we were called to last week was because a downstairs neighbour had complained of a leak through their ceiling. It turned out that our customer had recently purchased the house not realising that all the kitchen plumbing had been done by the previous owner himself. What we found was that all the waste pipes were actually running up hill which had resulted in a blockage and the waste water from the dishwasher flowing back up the stand pipe when the dishwasher drained.
In the end we had to pull out all the kitchen cabinets and redo all the kitchen waste plumbing. A full day of work and certainly not what the customer wanted to find out about her new flat.
One of the jobs we were called to last week was because a downstairs neighbour had complained of a leak through their ceiling. It turned out that our customer had recently purchased the house not realising that all the kitchen plumbing had been done by the previous owner himself. What we found was that all the waste pipes were actually running up hill which had resulted in a blockage and the waste water from the dishwasher flowing back up the stand pipe when the dishwasher drained.
In the end we had to pull out all the kitchen cabinets and redo all the kitchen waste plumbing. A full day of work and certainly not what the customer wanted to find out about her new flat.
Toilet and Sink Unblocking - Service and Beyond
One of the more specialist tasks Silver Saints Handyman Service undertakes is the unblocking of sinks and toilets. Usually this is a straight forward task, but we have had our share of difficult and messy jobs over the past week.
One of our handymen, Richard, was asked to replace a sani-flo unit in a basement toilet last week. He arrived to find that the customer had already purchased a replacement unit and just required us to fit it. It all seemed straight forward. But when Richard proceeded to dismantle the old unit he found that it had obviously failed sometime before the customer had stopped using the toilet and both the waste pipe and old sani-flo unit were completely blocked. It was a smelly and messy job to get the pipe work clear enough to fit the new sani-flo. Once the old unit was un-installed and emptied it was clear that the cause of the failure was that the customer had flushed bits of carpet thread down the toilet which had become entangled in the sani-flo's motor. Resulting in it burning out.
The second, out of the ordinary unblocking job also took place in a basement. We were called out to unblock a bathroom basin, but when we arrived we found that the basin, shower and toilet were blocked. After about 3 hours of roding we managed to break off a piece of limescale about the size of a coke can, which had obviously been building up over many years.
One of our handymen, Richard, was asked to replace a sani-flo unit in a basement toilet last week. He arrived to find that the customer had already purchased a replacement unit and just required us to fit it. It all seemed straight forward. But when Richard proceeded to dismantle the old unit he found that it had obviously failed sometime before the customer had stopped using the toilet and both the waste pipe and old sani-flo unit were completely blocked. It was a smelly and messy job to get the pipe work clear enough to fit the new sani-flo. Once the old unit was un-installed and emptied it was clear that the cause of the failure was that the customer had flushed bits of carpet thread down the toilet which had become entangled in the sani-flo's motor. Resulting in it burning out.
The second, out of the ordinary unblocking job also took place in a basement. We were called out to unblock a bathroom basin, but when we arrived we found that the basin, shower and toilet were blocked. After about 3 hours of roding we managed to break off a piece of limescale about the size of a coke can, which had obviously been building up over many years.
Labels:
Blocked drain,
Blocked Sink,
London Plumber,
Toilet unblocking
Monday, 15 September 2008
Sash Window Repair London
One of the most common of the more specialist jobs we undertake is the repair and replacement of sash window cords and sash balances.
We recently had a request to replace sash chains. Although sash chain is readily available from architectural iron mongers. Its very rare to find sash windows which use chains instead of normal sash cord. This is because the cost of the chain is about four times that of nylon cord with no additional benefit other than been out of the ordinary.
Unfortunately for our customer only one chain needed replacing and the shortest chain we could purchase was a 50ft reel at a cost of £90.
At least they'll have plenty of chain at hand if any of the other chains need replacing in the near future.
We recently had a request to replace sash chains. Although sash chain is readily available from architectural iron mongers. Its very rare to find sash windows which use chains instead of normal sash cord. This is because the cost of the chain is about four times that of nylon cord with no additional benefit other than been out of the ordinary.
Unfortunately for our customer only one chain needed replacing and the shortest chain we could purchase was a 50ft reel at a cost of £90.
At least they'll have plenty of chain at hand if any of the other chains need replacing in the near future.
Subscribe to:
Posts (Atom)